Here is a similar thing in audio monologue:

https://youtu.be/842OX2_vCic

There are a lot. I have a long playlist called “mope” But the first song that came to mind is:

“Blue Valentine” by Tom Waits. https://youtu.be/wsw0aWXufqM

It seems to me that the preposition usage corresponds to the boarding language pretty closely. Where “on” sounds most natural is also where “boarding” seems most appropriate.

Here is one linguist’s take, with proposed usage cases at the end: http://itre.cis.upenn.edu/~myl/languagelog/archives/005224.html

The schedule/route condition makes a lot of sense to me. Consider a bus converted to personal use as an rv:

“I boarded my bus and drove to the mountains” is a valid English sentence, but it sounds odd to me. But if it’s still a regular bus and drove->rode it works.

“I drove to the mountains in my bus” sounds better. Same vehicle as a city/school bus, different context. Change to a regular bus and drove->rode doesn’t sound right without also changing “in my” to “on the”.

Ah, ok

Do they? I don’t see any nel0x PRs. I moved away from it out of an abundance of caution.

Ah, ok. Makes sense.

16.1? Isn’t that still alpha? I thought the latest public release was 16.0?

Not entirely sure since I’m on Slowroll and Tumbleweed.

Funny, that’s exactly how I used to do it. And I still do if I want cool eggs sooner.

Our eggs may be different (US here, working from refrigerated washed eggs) or I am less lucky. I had mostly success, but sometimes had troublesome eggs and would have a few mangy looking ones where the white sticks to the inside of the shell and water doesn’t change it. Chunks of white pull away. After switching to the Kenji method I have more success than before. Still once in a while I get a stuck shell, but less often.

Peeling can be easy or difficult in part due to the cooking method. Here’s a good write up on tests of various cooking methods to make easier peeling hard boiled eggs: https://www.seriouseats.com/the-secrets-to-peeling-hard-boiled-eggs

You will need to add the hotel address to your eBay account. Otherwise asking a seller to send an item to a different address makes you sound like a scammer.

Most hotels accept guest packages.

So you have a single mobile device connecting via wg, correct? Not a second network?

If so the only configuration you should need on the router are firewall rules to allow forwarding from wg to lan. I am guessing that’s what the second step in the GL-iNet help accomplishes. That’s what I would recommend trying.

If I was doing this on “normal” OpenWRT I would create a firewall zone wg, and allow traffic to/from it and lan.

On the client device you should be good to go without changes if AllowedIPs is set to 0.0.0.0/, ::/0 (sending all traffic through wg).

That rule is supposed to be set on the “server” at the other end of the wg connection, using its own wg address as gateway. Not on the router for the lan you’re trying to access. That seems like a pretty easy mistake to make given that documentation.

You could try a short reset of just the network configuration. Hold reset for like 5 seconds. Might need to do a full reset (10+ seconds) if that doesn’t get you back in.

Great choice. In a similar vein - Rififi.

Just throwing out more ideas:

Is there a CPU spike on the VPS?

Anything weird about Wireguard on either end? Using kernel mode WG everywhere and not a user mode version, right?

As a test I would be inclined to try a very small mtu to see if it makes a difference. 1280 is a failsafe that I use when on unknown networks and trying to wg out.

Maybe try with a smaller packet size, like 1KB which I think is -l 1K

Are you specifying bandwidth (-b) on the iperf UDP test? It defaults to 1M if I recall correctly, which would explain the result.

If not, try -b 10M or -b 0 for unlimited (the behavior used for TCP).

I’m doing this on a couple of machines. Only running NFS, Plex (looking at a Jellyfin migration soon), Home Assistant, LibreNMS and some really small other stuff. Not using VMs or LXC due to low-end hardware (pi and older tiny pc). Not using containers due to lack of experience with it and a little discomfort with the central daemon model of Docker, running containers built by people I don’t know.

The migration path I’m working on for myself is changing to Podman quadlets for rootless, more isolation between containers, and the benefits of management and updates via Systemd. So far my testing for that migration has been slow due to other projects. I’ll probably get it rolling on Debian 13 soon.

Oh my!

Just tried this on a recent Trixie amd64 install. locate isn’t installed by default, but there is a locate/stable 4.10.0-3 package and it installs just fine for me.

sudo apt update
sudo apt install locate

I’m using Mikrotik and Ruckus. Would recommend both. I like that they are both at the level of reliability that I don’t think about them at all for months at a time. I update quarterly or less and they require no other attention from me. They also work well with my centralized data collection and alerting via LibreNMS.

OPNSense would be high on my list of alternatives when I reevaluate next time. And all Mikrotik would be a good option for me as well. Their Wi-Fi gear is not as strong as Ruckus or Ubiquiti, but they are super solid.

The Unifi ecosystem is a bit too centralized for me. I don’t want to create an account in order to use the hardware.

Is it possible that you didn’t enable snapshots during installation of TW, and then turned it on later?

That seems to be a common explanation on the openSUSE forum when .snapshots is missing from fstab (found by searching for the error you are hitting). There are some threads with workarounds. Basically, mount the .snapshots subvol manually, re-try the rollback and then add .snapshots to fstab so it works in the future.