• ChocoboRocket@lemmy.world
    link
    fedilink
    arrow-up
    9
    arrow-down
    2
    ·
    1 year ago

    Wouldn’t the inside of your house still have wood framing structure like this though? Looks like this neighbourhood uses vinyl siding, but you could easily have a brick/stone/stucco exterior.

    Isn’t it way harder to run plumbing/electric through cinder blocks, let alone hanging drywall? Or do you build a cinderblock box first and then frame the inside with wood?

    This place looks like it doesn’t have a basement, which is a must in Canada, and all our basements are generally concrete pour or cinderblocks, but we still have framing on the inside walls, and usually everything above the basement is wood + facade

    • PixTupy@lemmy.ml
      link
      fedilink
      arrow-up
      14
      ·
      edit-2
      1 year ago

      Portugal here, no wood, just iron, steel and concrete. And bricks, of course.

      • Maeve@kbin.social
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        Interestingly enough, I was contemplating the amount of sand used in cinder blocks vs tabby.

    • enki@lemm.ee
      link
      fedilink
      English
      arrow-up
      3
      ·
      1 year ago

      Typically, yes. In the US at least, cinder block houses are common particularly in Florida and coastal regions. The inside would still likely have a moisture barrier and insulation on modern homes, so you will typically have wood framing for interior walls to allow for wiring, plumbing, and insulation that is then drywalled over.

    • HenriVolney@sh.itjust.works
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Wouldn’t the inside of your house still have wood framing structure like this though? Extremely rare. Most houses built until the 1959s are made of stone and mortar, with walls at least 2 feet wide. In Northern Europe, i.e. UK, Belgium, Netherlands, parts of France and Germany, you would fund brick and mortar walls. Interior walls were built with thin hollow bricks assembled with mortar. These houses are a pain to renovate and most people just put everything agaisntbthe existing walls and then glue their drywalls on top of it with adhesive mortar. Since then, it is mostly cinder blocks or hollow brichs that are then filled with concrete. Modern building regulations impose steel reinforcement in regions prone to earthquakes. Interior walls are built with a framing of steel railings that are very light and flexible when handled but very sturdy when assembled. The drywall is screwed on each side of these rails which gives room for electrical and plumbung.

    • Zoidberg@lemm.ee
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Isn’t it way harder to run plumbing/electric through cinder blocks, let alone hanging drywall? Or do you build a cinderblock box first and then frame the inside with wood?

      At least in South America (where most buildings are made of brick and mortar) there’s no drywall. The internal finish is a smooth layer on top of the bricks and that’s it. That makes it easier to hang heavy things on the wall but also makes it impossible to run wires of any kind. It also makes repairs more difficult.

      • setVeryLoud(true);@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Our schools in North America are mostly built like this. I think the bricks are hollow, so they can run power, but most things reside inside the drop ceiling.