Onihikage

Up in the Hardware Information section of hyfetch, on the left.

Webtoon is still shitty in other ways. When they adapt a property, they want it their way, regardless of the author’s original vision. I’ve seen several stories that originated on Royal Road get Webtoon adaptations, and the adaptations always seem to change or leave out important parts of the story, making characters look stupid or just completely replacing entire sets of characters, forcing the story to diverge substantially when inevitably something they got rid of turns out to have been critically important to where the author was taking things. They turn great stories into middling slop every single time.

Not them, but I do! https://youtu.be/s1fxZ-VWs2U

Try KittyToy (itch.io).

• Crash Course Pods: The Universe, with John Green & Dr. Katie Mack. Talks about how the universe came into existence.
• Volts, with David Roberts. Talks about electrification and the energy transition.

I don’t listen to many podcasts, but those two are pretty great.

Unfortunately I can’t even test Llama 3.1 in Alpaca because it refuses to download, showing some error message with the important bits cut off.

That said, the Alpaca download interface seems much more robust, allowing me to select a model and then select any version of it for download, not just apparently picking whatever version it thinks I should use. That’s an improvement for sure. On GPT4All I basically have to download the model manually if I want one that’s not the default, and when I do that there’s a decent chance it doesn’t run on GPU.

However, GPT4All allows me to plainly see how I can edit the system prompt and many other parameters the model is run with, and even configure multiple sets of parameters for the same model. That allows me to effectively pre-configure a model in much more creative ways, such as programming it to be a specific character with a specific background and mindset. I can get the Mistral model from earlier to act like anything from a very curt and emotionally neutral virtual intelligence named Jarvis to a grumpy fantasy monster whose behavior is transcribed by a narrator. GPT4All can even present an API endpoint to localhost for other programs to use.

Alpaca seems to have some degree of model customization, but I can’t tell how well it compares, probably because I’m not familiar with using ollama and I don’t feel like tinkering with it since it doesn’t want to use my GPU. The one thing I can see that’s better in it is the use of multiple models at the same time; right now GPT4All will unload one model before it loads another.

I have a fairly substantial 16gb AMD GPU, and when I load in Llama 3.1 8B Instruct 128k (Q4_0), it gives me about 12 tokens per second. That’s reasonably fast enough for me, but only 50% faster than CPU (which I test by loading mlabonne’s abliterated Q4_K_M version, which runs on CPU in GPT4All, though I have no idea if that’s actually meant to be comparable in performance).

Then I load in Nous Hermes 2 Mistral 7B DPO (also Q4_0) and it blazes through at 50+ tokens per second. So I don’t really know what’s going on there. Seems like performance varies a lot from model to model, but I don’t know enough to speculate why. I can’t even try Gemma2 models, GPT4All just crashes with them. I should probably test Alpaca to see if these perform any different there…

I actually found GPT4ALL through looking into Kompute (Vulkan Compute), and it led me to question why anyone would bother with ROCm or OpenCL at all.

Rather than replace, I’d guess it could be an alternative. The best part of it will be the ability to natively disable the top tab bar instead of needing a janky userchrome css hack that doesn’t even fully work.

At least their username is accurate!

I mainly recommend Universal Blue distros to newbies, like Bazzite or Aurora. The immutable nature more or less means users don’t have to worry about performing maintenance of system apps like they might on some distros, mostly don’t have to worry about dependencies, and are less likely to irreversibly break the system themselves or in an update.

That said, these distros are Fedora-based, and I think that’s fine. No idea who out there is recommending Arch of all things.

You don’t need to add the exe of whatever mod tool to Steam, use Steam Tinker Launch. It lets you add an exe to run instead of the game, concurrent with the game, or injected after the game is up, and it will run in the same prefix that Proton uses for that game. It also has tools for installing and using several mod managers, and generally a ton of good features for tinkering with the game.

The main issue I haven’t solved is getting something like the Nexus mods “open in manager” to work. My guess is I might have to install, run, and configure a web browser inside the prefix, but that sounds really annoying so I haven’t tried it.

The ELI5 for Fedora’s atomic desktops is that if Windows had an Atomic Desktop version, Program Files and most of the Windows folder would be read only, and each program you installed yourself would go into its own folder in your user directory. That’s the basic idea. It’s harder to screw up an Atomic system as long as you stick to containerized app formats like flatpak/appimage whenever possible. It makes it easier for everyone to diagnose problems, and easier for users to roll back if an update has problems. Even if you were to install it right now, you could use one simple command to “roll back” to any image from the last three months.

The benefit of Bazzite is you have all of the above, plus a lot of gaming-related stuff preinstalled which, if you were to install them yourself in a normal Fedora environment, you’d likely have to spend a lot of time just learning how they’re supposed to be configured, how they interact, which versions have problems, and how to troubleshoot problems when an update to one app breaks a prerequisite for something else; eventually you end up in config hell instead of actually using your computer. With Bazzite, the image maintainers are the ones in config hell - they work out the kinks, app versioning, communicate with upstream to fix issues, all that, so your system should be in the most functional state that a Linux system can be, so you only have to think about using your apps.

tl;dr

• Atomic Desktops are more resilient to randomly breaking from updates or user error, and are easier to revert to a prior state if problems do arise
• Bazzite is a custom Atomic image with lots of gaming stuff preinstalled and preconfigured to work properly out of the box
• If you’re a gamer and wanting to try out Linux, Bazzite is going to be the least painful way to get your feet wet.
• Immutable distros are excellent for daily driving. I daily drive one myself!

MPV is a video player.

All the cybersecurity in the world won’t matter if a handful of manipulated idiots people shoot a bunch of unguarded and remotely located substation transformers.

If “nearly every app” that people already use suddenly has a big warning on it, people will quickly decide the warnings are meaningless and start ignoring them, like Prop 65 warnings. Congratulations, we’ve moved the needle backwards.

You have to meet people where they’re at. I finally switched to Linux when MS introduced a feature I wanted no part in (Recall AI), but I would have given up within a day or two if the transition hadn’t been basically seamless. I was able to pick up right where I left off, using all the same apps I did on Windows except MusicBee RIP, but now I’m in a better position than before, on an open-source OS instead of closed-source. Now there’s a little less friction between me and better, freer software.

When I look at Firefox in Discover, it only shows the list of permissions the flatpak will be given out of the box, with no warning of it being “potentially unsafe.” This certainly does seem like the better way to handle it.

Also, the warning on the Flathub website is clickable - it expands into the full permissions list. Why it defaults to “no information except maybe dangerous” is beyond me.

As a fellow virgin, if you actually do want to not be a virgin, but see yourself as having “failed” then think deeply on what the reason is.

First of all, if you’ve “failed” then what did you actually try that failed? Do you constantly take steps to meet new people and find friends, male and female, whether in hobbies or online or anywhere? If not, why not? If you have, and therefore have lots of friends you speak with regularly, are you recruiting them to help you find a romantic partner? Meeting lots of people, making friends, and then asking those friends for help is a great way to accomplish almost anything. It’s much easier early in life, but it’s never impossible.

If you have taken steps to meet lots of people (and I mean a lot of people), but none of them or their single-and-looking friends wanted to date you, then did they give reasons? What is it about you that they don’t like? Are you taking care of yourself? Maintaining good personal hygiene? Dressing well? Do your peers find you unpleasant to be around? Are you simply boring? If you meet lots of people and all of them reject you, there’s likely something you’re not doing that you need to be doing. Work on yourself to be someone that people want to be around.

If any of what I’ve said here is relevant to you, even if it’s unpleasant to think about, it’s very important to be consciously aware of it so that you can accept that your current reality is one you’ve chosen, consciously or unconsciously… and that you can choose differently.

I’m one year younger than you, also virgin guy who would maybe like to have a partner, but through introspection and years of learning shit on the internet, I’m aware of the likely reasons I haven’t gotten one yet - I just don’t meet people, and when I do, even when we get along, I tend to fall out of touch immediately. I believe I likely have undiagnosed and unmedicated ADHD along with some steep but situational social anxiety, both of which I know have and will continue to keep me from forming and maintaining many social connections that I otherwise could have, which I could be leveraging to find people to date.

So, I recognize what my stumbling blocks are, and that if I decide I really do want to find love and get laid, I have to deal with those stumbling blocks. For me, that will involve speaking to a head doctor and learning more precisely how my brain works and what strategies I can use to overcome those blocks. It’s not about fixing me, it’s about being able to be more me. But until I do that, I accept that my current status of “virgin, but maybe wants to change that” is there because I have, in some way, chosen up to this point not to change it.

If you figure out what your stumbling blocks are, or even if you haven’t, tell a close and trustworthy friend or family member about where you’re at, where you want to be, and how you feel about it. They might have options, or be able to help you take whatever steps you need to be where you want to be. If you feel like you just can’t make yourself do the thing, get someone else to give you a kick in the ass.

Sidebery (FOSS, MIT license) has several features that could be used to help you merge thousands of tabs into one window without choking out your memory usage, and generally makes it really easy to organize a massive amount of tabs. It would take several steps. First, you’d right-click the panel (the top-level organizational unit in Sidebery, above the tabs) on each window and select Save to bookmarks (example folder structure: selecting Bookmarks Toolbar/merge/ for a panel named panel1 would save the tabs under Bookmarks Toolbar/merge/panel1; click a folder twice in the selection dialog to expand it). Then you’d close that window and repeat with each window, being careful with the panel names so as not to overwrite any other window’s tabs. Once you’re down to one window, create an empty panel, right-click it, and select Restore from bookmarks. From this dialog, selecting the top-level folder that all the other bookmarked panels reside in (Bookmarks Toolbar/merge/ in this example) will import every tab from every window that was bookmarked, grouped by the window name.

When Sidebery imports a panel from bookmarks, the tabs are imported in an unloaded state, so they have basically no effect on memory until you actually click into them and load them. I can restore about 50 tabs per second from bookmarks without my system even slowing down, taking me from 0 to 500 tabs in about 10 seconds. It’s not exactly a one-click option, but I wager it will be significantly faster and less prone to completely breaking than your current workflow, and a little easier to back up (even if window/session states get wonky, bookmarks sync pretty much instantly).

Once your tabs are all in the same window, you can load tabs you want loaded by selecting a bunch (ctrl-click, shift-click, etc., just like in file explorer) and refreshing them, presumably avoiding YouTube tabs (should probably download those with YT-DLP anyway if you want to keep them). Sidebery will actually limit how many tabs it reloads at once, so it’ll never choke out your system by trying to instantly load a thousand of them (unlike if you select “open all in tabs” in Firefox’s native bookmarks context menu… eurgh). Even if it isn’t faster (though I suspect it is) the browser is at least usable while that’s going on. I’m not sure how well this method preserves containers, mainly because I don’t use them, so if you do, keep an eye on that if you test it out. All I know for sure is Sidebery supports reopening a tab in a new/different container because that’s in the default context menu.

There’s more time savings than just window merging and tab loading, there’s the tree-style viewing, being able to collapse whole trees of tabs you aren’t actively paying attention to, seeing the full titles of 30-40 tabs at a time, no more sideways scrolling, a built in search bar to filter shown tabs by title, fully customizable keyboard shortcuts and context menus… it’s actually incredible how much this addon can do, and not only does it have a lot of settings and customization that should let you tailor its behavior to exactly how you want it, you can even sync its actual settings through Firefox! (just make sure to set your device name) Only thing it can’t do is remove the tab strip to give you more vertical real estate, but Mozilla might be working on that.

I know what it’s like to be attached to a cumbersome workflow. I hope this can help streamline things for you a bit and make life with ~2,000 tabs just a little less troublesome.

I’d get premium if they weren’t so insistent on bundling in bullshit I don’t want or care about to justify the high price. I put up with enough of that from cable TV. I’ll pay when there’s an ad-free tier that doesn’t do anything else and is a reasonable price for “the service that’s free with ads, but without ads”. If there was a per-device premium tier that I could throw on my Roku, and all my family members could have premium when they stream from there, I’d pay for that. I’d pay for family tier if it didn’t have the dumb single-household rule which screws over truckers and those who travel for a living.

Google has options they could take to convince consumers to pay to not see ads, but there’s no creativity left there, no effort to court the market or adapt the service and prices to what potential customers need and are willing to pay. And it’s because they believe they are the market, and want to keep it that way.